We make bunkies kit from Canadian wood.

We make bunkies kit from Canadian wood.

The Canyon

$ 5,649.00

This 9’ by 9’ structure makes the best possible use of interior space with an additional 9’ by 7’ loft in the upper storey. Take advantage of the 3’ overhang to efficiently maximize sleeping or storage.

9’ x 9’ + 3′ overhang. Wood: Spruce, pine, fir from Canada Specially selected and dried Flooring: CAB pressure-treated 2’’ x 6’’ wood sub-structure 2’’ x 6’’ interlocking tongue and groove floor boards Walls: 2’’ x 6’’ interlocking tongue and groove boards Roofing: 2’’ x 6’’ structure (laminates 3” x 4.5” and 4.5” x 5.5”) 1’” x 6’’ interlocking tongue and groove boards Roof: 172 sq ft (for metal roofing: 72’’ Long x 167’’ Wide x 2 sides) Roof exceeds 12” and the overhang by 36” IMPORTANT NOTE: Install 7/16’’ OSB underlay before nailing shingles Internal Dimensions: 96’’ Wide x 96’’ Deep + mezzanine 84” x 96” Under the mezzanine: 81’’ High On mezzanine level: 35” High on sides and 60’’ High in the centre Mezzanine: 56 sq ft External Dimensions: Base: 108” Wide x 108” Deep + 36” overhang Foundation block: 98 7/8’’ Wide x 98 7/8’’ Deep Total Height, without foundation blocks: 155’’ Doors: 1 French-style 30’’ Wide x 70’’ High Door window: 18 3/4’’ Wide x 31’’ High Other windows: Yes: 3 windows Front: 24” Wide x 50” High Side: 25” Wide x 24” High Mezzanine: 20” Wide x 20” High Available for pick-up: Yes Shipping available at added cost: Yes

The shipping package:

Number of pieces: 1 bundle
Dimensions: approx. 4’ Wide x 4’ High x 14’ Long
Weight: 3,850 lbs total

Included with every model:
• Wood components
• Illustrated Assembly Guide
• Doors with hinges and handles
• Pressure-treated wood floor joists
• Roof structure
• Hardware

What you’ll need to buy separately:
• Roof finishing material
• Joint sealant for exterior corners
• Outdoor wood protection product (paint, stain or oil)

Our team of experts is always at your disposal, standing by to help if you have building questions or need assistance. Reach out to us at 1-877-554-0854.

Putting together your Bunkie is a straightforward process, and you can make it a social gathering by including a few of your DIY-minded friends. So other than snacks and cold drinks, here’s what you’ll need to prepare.

Installation time needed:
2 days

Recommended number of people:
2 +

Tools you’ll need for the job:
Hammer
Rubber mallet
Tape measure
Drill
Square screwdriver bit (#2 for screw #8 and #3 for screw #10)
Bit, 3/16’’
Level, 48’’
Ladder, 16’
Saw (optional)

Location and laying the foundation

First, we recommend checking with your municipality about any requirements regarding the location of your building and any permits you may need. Next, ensure your desired spot is elevated with well-drained soil, where no water will accumulate. You’ll need to remove the topsoil and replace it with gravel.

Your Bunkie should clear the ground by at least 8’’ for adequate air circulation under your structure. The chosen footings should be level and square (the diagonal measurements should be equal). Your Bunkie floor and walls (183’’ x 183’’) must be supported on the footings of the chosen material. You will need either 12 footings, or nine footings total with three compound beams under the floor joists.

Various options for the foundation are available, depending on your preference and budget:
– Blocks of treated wood, 6’ x 6’ or 8’ x 8’: $
– Solid concrete blocks: $$
– Helical piers: $$$
– Cast cement footings: $$$$

 

Our team of experts is always at your disposal, standing by to help if you have building questions or need assistance. Reach out to us at 1-877-554-0854.