We make bunkies kit from Canadian wood.

We make bunkies kit from Canadian wood.

The Moraine

$ 3,995.00

This 10’ by 8’ structure is a simple way to gain more living space. The convenient double doors open wide for easy access, and the sturdy design comes together in just one weekend of building.

10’ x 8’ structure. Wood: Spruce, pine, fir from Canada Specially selected and dried Flooring: CAB pressure-treated 2’’ x 6’’ wood sub-structure 2’’ x 6’’ interlocking tongue and groove floor boards Walls: 2’’ x 6’’ interlocking tongue and groove boards Roofing: 2’’ x 6’’ structure 1’’ x 6’’ interlocking tongue and groove boards Roof: 120 sq ft (for metal roofing: 74’’ Long x 117’’ Wide x 2 sides) IMPORTANT NOTE: Install 7/16’’ OSB underlay before nailing shingles Internal Dimensions: 9’1’’ Wide x 7’1’’ Deep Cathedral ceiling, 77’’ High on sides and 104’’ High in the centre (this is a unique feature, as walls are generally lower and trusses reduce clearance) External Dimensions: Base: 10’ Wide x 8’ Deep Foundation block: 111’’ Wide x 87’’ Deep Overhang: 18’’ Total Height, without foundation blocks: 119’’ Doors: 2 French-style 30’’ Wide x 70’’ High Door windows: 18-3/4’’ Wide x 31’’ High Other windows: Not included Available for pick-up: Yes Shipping available at added cost: Yes

The shipping package:

Number of pieces: 1 bundle
Dimensions: approx. 4’ Wide x 3’ High x 10’ Long
Weight: 1,875 lbs

Included with every model:
• Wood components
• Illustrated Assembly Guide
• Doors with hinges and handles
• Pressure-treated wood floor joists
• Roof structure
• Hardware

What you’ll need to buy separately:
• Roof finishing material
• Joint sealant for exterior corners
• Outdoor wood protection product (paint, stain or oil)

Our team of experts is always at your disposal, standing by to help if you have building questions or need assistance. Reach out to us at 1-877-554-0854.

Putting together your Bunkie is a straightforward process, and you can make it a social gathering by including a few of your DIY-minded friends. So other than snacks and cold drinks, here’s what you’ll need to prepare.

Installation time needed:
2 days

Recommended number of people:
3

Tools you’ll need for the job:
Hammer
Rubber mallet
Tape measure
Drill
Square screwdriver bit (#2 for screw #8 and #3 for screw #10)
Bit, 3/16’’
Level, 48’’
Ladder, 6’
Saw (optional)

Location and laying the foundation

First, we recommend checking with your municipality about any requirements regarding the location of your building and any permits you may need. Next, ensure your desired spot is elevated with well-drained soil, where no water will accumulate. You’ll need to remove the topsoil and replace it with gravel.

Your Bunkie should clear the ground by at least 8’’ for adequate air circulation under your structure. The chosen footings should be level and square (the diagonal measurements should be equal). Your Bunkie floor and walls (111’’ x 87’’) must be supported on four footings of the chosen material.

Various options for the foundation are available, depending on your preference and budget:
– Blocks of treated wood, 6’ x 6’ or 8’ x 8’: $
– Solid concrete blocks: $$
– Helical piers: $$$
– Cast cement footings: $$$$

 

Our team of experts is always at your disposal, standing by to help if you have building questions or need assistance. Reach out to us at 1-877-554-0854.