We make bunkies kit from Canadian wood.

We make bunkies kit from Canadian wood.

The Versant

$ 4,495.00

This 10’ by 10’ structure offers a wide variety of uses and functions so your imagination can run free. Double doors with triple frosted windows add a refined touch.

10’ x 10’ structure. Wood: Spruce, pine, fir from Canada Specially selected and dried Flooring: CAB pressure-treated 2’’ x 6’’ wood sub-structure 2’’ x 6’’ interlocking tongue and groove floor boards Walls: 2’’ x 6’’ interlocking tongue and groove boards Roofing: 2’’ x 6’’ structure 1’’ x 6’’ interlocking tongue and groove boards Roof: 132 sq ft (for metal roofing: 141’’ Long x 136-1/2’’ Wide x 1 side) IMPORTANT NOTE: Install 7/16’’ OSB underlay before nailing shingles Internal Dimensions: 9’ Wide x 9’ Deep Sloped ceiling, 90’’ High in front and 87’’ High in back External Dimensions: Base: 9’11’’ Wide x 9’11’’ Deep Foundation block: 111’’ Wide x 111’’ Deep Total Height is 112’’ in front and 100’’ in back Doors: 2 French-style 34’’ Wide x 80’’ High Door windows, 3 Other windows: Yes: 1 window, 46’’ Wide x 21’’ High Available for pick-up: Yes Shipping available at added cost: Yes

The shipping package:

Number of pieces: 1 bundle
Dimensions: approx. 4’ Wide x 3’6’’ High x 12’ Long
Weight: 2,100 lbs

Included with every model:
• Wood components
• Illustrated Assembly Guide
• Doors with hinges and handles
• Pressure-treated wood floor joists
• Roof structure
• Hardware

What you’ll need to buy separately:
• Roof finishing material
• Joint sealant for exterior corners
• Outdoor wood protection product (paint, stain or oil)

Our team of experts is always at your disposal, standing by to help if you have building questions or need assistance. Reach out to us at 1-877-554-0854.

Putting together your Bunkie is a straightforward process, and you can make it a social gathering by including a few of your DIY-minded friends. So other than snacks and cold drinks, here’s what you’ll need to prepare.

Installation time needed:
2 days

Recommended number of people:
3

Tools you’ll need for the job:
Hammer
Rubber mallet
Tape measure
Drill
Square screwdriver bit (#2 for screw #8 and #3 for screw #10)
Bit, 3/16’’
Level, 48’’
Ladder, 6’
Saw (optional)

Location and laying the foundation

First, we recommend checking with your municipality about any requirements regarding the location of your building and any permits you may need. Next, ensure your desired spot is elevated with well-drained soil, where no water will accumulate. You’ll need to remove the topsoil and replace it with gravel.

Your Bunkie should clear the ground by at least 8’’ for adequate air circulation under your structure. The chosen footings should be level and square (the diagonal measurements should be equal). Your Bunkie floor and walls (111’’ x 111’’) must be supported on the five footings of the chosen material.

Various options for the foundation are available, depending on your preference and budget:
– Blocks of treated wood, 6’ x 6’ or 8’ x 8’: $
– Solid concrete blocks: $$
– Helical piers: $$$
– Cast cement footings: $$$$

 

Our team of experts is always at your disposal, standing by to help if you have building questions or need assistance. Reach out to us at 1-877-554-0854.